Short answer: Elestar is exhibiting at the 140th Canton Fair (China Import and Export Fair) in Guangzhou from 15 to 19 October 2026. Our booth is 7.1B47-48. We will be showing submersible and deep-well pumps, booster and automatic water supply sets, irrigation pumps, motors and pressure tanks, with technical staff on the stand to work through duty points, OEM branding and container planning. If you are travelling to the fair, message us before you come and we will set aside a time for you.

Visit Elestar at the 140th Canton Fair, booth 7.1B47-48, 15-19 October 2026
Visit Elestar at the 140th Canton Fair, booth 7.1B47-48, 15-19 October 2026

At a glance

DetailInformation
Fair140th Canton Fair — China Import and Export Fair
Dates15 – 19 October 2026 (Phase 1)
CityGuangzhou, Guangdong, China
Our booth7.1B47-48
On displaySubmersible & deep well pumps, booster and intelligent sets, irrigation pumps, motors, pressure tanks
Best forImporters, distributors, wholesalers, installers and OEM / private-label buyers

Why we are at the fair again

The Canton Fair has been running since 1957 and remains the single most efficient place in the world to compare water pump suppliers face to face. Two halls of walking beats two months of email.

We exhibit because pumps are physical products that fail or succeed on details you cannot see in a PDF: how a stage stack is machined, how a motor is wound and varnished, how a unit behaves on a test bench. At the booth you can pick a pump up, turn it over, and ask the person who builds it what happens when the well draws down or the water carries sand.

What we are bringing to booth 7.1B47-48

Product familyTypical useWhere to read more
Submersible & deep well pumpsBoreholes, wells, deep water liftingDeep well & borehole range
Booster and intelligent pump setsLow mains pressure, buildings, automatic supplyPressure boosting range
Household water supply setsDomestic supply, tanks, automatic pressure controlHousehold supply range
Irrigation pumpsFarm, field and garden irrigationAgriculture & garden range
MotorsReplacement and OEM motor supplyMotors
Pressure tanks & controllersSystem stability, dry-run protectionPressure stabilisation

Samples, cutaway parts and material certificates will be on the stand. If you want to see a specific model, tell us in advance and we will bring it rather than describe it.

Plan your visit: three things to do before you fly

1. Register as a buyer and sort your badge in advance. Buyer registration is handled on the official fair site, and collecting your badge on arrival is much faster when the paperwork is already done. The official source for everything about the fair — dates, phases, halls, registration and the booth locator — is cantonfair.org.cn.

2. Check the phase. The Canton Fair runs in three phases across roughly three weeks, and each phase covers different product categories. Our water pumps sit in the October 15–19 window, so book your travel for that week. Independent listings such as TradeFairDates and the ExamineChina Canton Fair guide confirm the same Phase 1 dates.

3. Book your meeting with us before the halls fill up. Fair days are long and the good conversations happen early. Send us your product list and target markets and we will pre-select models, prepare pricing for your quantities, and have a technical colleague ready rather than improvising.

What to bring if you want a genuinely useful meeting

  • Your duty point — required flow rate, total head, and whether the source is a borehole, a tank, a mains line or surface water
  • Your market — voltage and frequency, plug and certification requirements, language of the manual and nameplate
  • Your commercial frame — target price band, expected annual volume, and whether you need OEM branding
  • Your packaging needs — retail carton, master carton, pallet configuration, container loading preference

Bring those four things and we can usually quote meaningfully at the table rather than promising an answer by email afterwards.

Elestar water pump booth at the 135th Canton Fair
Elestar water pump booth at the 135th Canton Fair
Reviewing pump models with buyers at the 134th Canton Fair
Reviewing pump models with buyers at the 134th Canton Fair
Elestar exhibition stand at the 133rd Canton Fair
Elestar exhibition stand at the 133rd Canton Fair

Where our buyers come from

Our export business is concentrated in Eastern Europe, North America, Africa and the Middle East, and the fair is where most of those relationships started. If you are already importing pumps and looking for a second or replacement supplier, the conversation at the booth is usually about three things: consistency between shipments, what happens when something fails, and how quickly a spare can be shipped.

We bring the answers to all three — including our quality control flow and warranty terms — on paper, not just in conversation.

FAQ

When and where is the 140th Canton Fair? The 140th session runs in three phases in Guangzhou during October and November 2026. Our products are shown in the Phase 1 window, 15–19 October 2026, at the China Import and Export Fair complex in Guangzhou.

What is Elestar’s booth number? Booth 7.1B47-48. Check the official fair app’s booth locator on the day in case the organisers adjust hall layouts.

Do I need an appointment to visit the booth? No — you are welcome to walk up. But fair days are busy, and buyers who tell us in advance what they are looking for get a prepared conversation instead of a brochure. Send us a message and we will hold a slot.

Can I get wholesale pricing at the fair? Yes. Bring your expected annual volume and target price band and we will quote against it. For reference detail before you travel, see our product range.

Do you offer OEM and private-label branding? Yes. Nameplate branding, packaging, colour and manual localisation are all possible; tooling-dependent changes are the only ones that need extra lead time. Tell us your requirement in advance so we can confirm exactly what is feasible on your target models.

What if I cannot attend the fair? Tell us your duty point and market by email or through our contact page, and we will quote and send documentation the same way. Many of our long-standing customers started as a document exchange, not a handshake.

Come and see the pumps

If you are in Guangzhou between 15 and 19 October 2026, come to booth 7.1B47-48. If you cannot make it, send us your specification and we will treat it exactly the same way — with the numbers worked out and the certificates attached. Start at our product pages, read about how we build and test, or contact the team directly.

Sources

X